KONGSBERG KG5 3MW Mobile packages 3 Units

3 Units never used mobile packages KONGSBERG KG5 3MW

50Hz or 60Hz 2740kW 6.6Kv DF Mobil Power Plants, Ex-Malaysia storage

1980 and have never been used requirement change.

They are warehouse
stored and in brand new condition.

The Turbines are configured on trailers with complete set of control panel and alternator by Kobelco.

DESCRIPTION

The
KG5 generating set is an industrial type electric power unit comprising an
open-cycle.

two-shaft gas turbine prime mover and a brush less open-ventilated
generator rated to suit the gas turbine characteristics at various ambient
conditions.

Standard output voltages range from 380 V to 13.8 kV at 50 or 60
hertz.

SPECIFICATION

Output
shaft speed:                                        1500
or 1800rev. min 150.60 Hz) as standard

Gearbox:                                                         Epicyclical

Compressor
pressure ratio:                           6.3:1

Speed
control characteristics:

Steady
state speed control:                            Max
| 0.25%

TYPICAL ON-SITE PERFORMANCE DATA

 (Sea
level, 100 mm wg intake loss, 100 mm wg exhaust loss and 96% generator
efficiency:

Ambient
temp.                                                 Max                                       Base Load

15UC
(59°F)                                                    3385 kVA                               3425 kVA

35°C
I95°F)                                                     3340 kVA                               2905 kVA

Max      Continuous power rating for operation up
to 1500 hours per year

Output
stated based on power factor:            0.8

Fuel
consumption:                                          1150
kg h (2535 Ib/h) (at 3000 kW. 16°C wi/ diesel fuel)

A
regenerator can be installed when improved fuel economy is required or
continuous duty applications. Full load thermal efficiency can thus be
increased to over 30% (corr to approx. 850 kg h diesel fuel at 3000 kW output).

Lube oil
consumption:                                     Approx.
0.07 kg/h (0.15 Ib/h)

STARTING

Starting
is achieved by a starter motor connected to the gas generator rotor via a
sprag-clutch in the auxiliary gearbox. Starting time to nominal speed with full
load applied is 45 to 60 seconds depending on systems selected.

Materials

Component                                                     Material

Turbine Wheel:                                               Waspaloy

Compressor
wheel:                                        Titanium
alloy.

Combustor:                                                     Hastalloy
X

Turbine Housing:                                             PE
10

Reduction
Gear Casing:                                 Silumin

Lube oil Tank
Foundation:                               Mild
Steel

Pressure
Casing:                                            Coated
Mild Steel

Power Turbine:                                               Waspaloy

CORROSION RESISTANCE

The complete
generating set is designed for operation in all types of industrial environment
and is also approved by the major marine classification societies for use on
board ships. Special attention has been paid to corrosion resistance and sleeve
bearings are employed to support ail rotating parts in the turbine engine.

Weight:

 Complete
generating set with accessories necessary to run (approx.:                   

21 003 kg        46
000 lb.

Combustor
Head Complete:               123 kg             265
lb.

Auxiliary
Gear complete:                     243 kg             530
lb.

Gas
Generator Rotor:                         235
kg             5181b

Power
Turbine Rotor:                         73
kg               167
1b

Main
Reduction Gear:                         805
kg             1775
1b

Complete GT
with Reduction Gear:   376D kg           8290 It)

 contact us for more details